Bending Machines
r a c i n g
r a c i n g
RELIABILITY AND PERFORMANCE:
In a dynamic construction site, it is essential to have machines capable of operating continuously to meet project deadlines. Our bending machines, designed to handle high production volumes, offer efficiency, high performance, and maximum reliability.
Each component of the bending machines is rigorously checked during production to ensure reliability and safety. The standard auto-braking motors, made in Italy, and the electrical components from the best brands are chosen to optimize the working capacities of each unit.
Our team of designers is always ready to customize the base models to meet the specific needs of each customer.
r a c i n g
MAIN FEATURES AND MODELS:
The P line represents our response to the challenges of an increasingly demanding and competitive market. Characterized by advanced construction technologies and accumulated experience over time, the series offers:
- A monoblock gearbox in spheroidal cast iron that guarantees maximum solidity and sealing without welding.
- An enlarged rotating plate that allows larger bending radii compared to the standard model.
- Long carriages that allow “double bending,” expanding the processing possibilities.
The P series includes seven models, designed to meet a wide range of work needs, and each machine comes with a one-year warranty on all mechanical components.
r a c i n g
EQUIPMENT AND TECHNICAL SPECIFICATIONS:
- Stopper, essential for fixing the rod on the work surface, which allows to release the stress exerted on the bar at the point before bending, thus avoiding possible deformations of the rod. Usable with diameters up to 20mm;
- Square pin, to be used together with the stopper, to counteract and nullify the effort exerted on the stopper by bending;
- Bending pin in special cemented and tempered steel, to be positioned on the rotating plate, for the production of stirrups, as it allows to obtain tight bending radii. To be used with bars up to Ø 12mm;
- Three bush holder pins in special cemented and tempered steel, to be positioned on the work surface and completed with bushes. They support, together with the bushes, the stress deriving from the bending phase;
- Set of bushes, designed in detail for each of the bending machine models. The radius of the bush positioned in the central hole of the plate corresponds to the bending radius. For the use of bars from Ø 15mm onwards, it is important that the diameter of the bush is at least three times that of the bar to be bent. The bushes are also used as a spacer for the bending bush holder pin, in cases where the alignment of the bar is ineffective. The rod is thus blocked, but the rotation of the bush on the pin allows the rod to slide during bending, thus avoiding possible friction;
- Two pins, to be positioned on the plate to determine the bending angle;
- Set of Allen keys, useful for ordinary maintenance;
- Electric pedal, to facilitate the operator allowing him to have free hands and therefore to work from all sides of the machine;
- Set of wheels for moving the machine;
- Flying plug, which ensures electrical connection;
- Two mushroom buttons, to stop the machine instantly in case of emergency. They are placed on two opposite sides of the machine.
- Long carriages, supplied with all Evolution bending machines with a maximum of 10 holes, essential if you want to perform double bending.
In the design and construction of each bending machine, the criteria and measures suitable for meeting the essential safety requirements provided by the Machinery Directive 2006/42/CE have been adopted.
| MODEL | CUTS PER MINUTE | HP/KW | 65 KG/MM² MM |
65 KG/MM² IN |
85 KG/MM² MM |
85 KG/MM² IN |
CM | KG | DOWNLOAD |
|---|---|---|---|---|---|---|---|---|---|
| MODELP34 | CUTS PER MINUTE11 | HP/KW3/2,2 | 65 KG/MM² 1Ø 30 mm 2Ø 22 mm 3Ø 18 mm |
65 KG/MM² 1Ø 1.18 in 2Ø 0.87 in 3Ø 0.71 in |
85 KG/MM² 1Ø 28 mm 2Ø 20 mm 3Ø 16 mm |
85 KG/MM² 1Ø 1.10 in 2Ø 0.79 in 3Ø 0.63 in |
CM75x80x85 | KG285 | TECNHICAL DATA SHEET |
| MODELP38 | CUTS PER MINUTE9 | HP/KW4/3 | 65 KG/MM² 1Ø 34 mm 2Ø 26 mm 3Ø 20 mm |
65 KG/MM² 1Ø 1.34 in 2Ø 1.02 in 3Ø 0.79 in |
85 KG/MM² 1Ø 32 mm 2Ø 24 mm 3Ø 18 mm |
85 KG/MM² 1Ø 1.26 in 2Ø 0.94 in 3Ø 0.71 in |
CM86x90x85 | KG320 | TECNHICAL DATA SHEET |
| MODELP44 | CUTS PER MINUTE6 | HP/KW4/3 | 65 KG/MM² 1Ø 38 mm 2Ø 30 mm 3Ø 24 mm |
65 KG/MM² 1Ø 1.50 in 2Ø 1.18 in 3Ø 0.94 in |
85 KG/MM² 1Ø 36 mm 2Ø 28 mm 3Ø 22 mm |
85 KG/MM² 1Ø 1.42 in 2Ø 1.10 in 3Ø 0.87 in |
CM105x95x89 | KG469 | TECNHICAL DATA SHEET |
| MODELP54 | CUTS PER MINUTE6 | HP/KW5,5/4 | 65 KG/MM² 1Ø 44 mm 2Ø 34 mm 3Ø 28 mm |
65 KG/MM² 1Ø 1.73 in 2Ø 1.34 in 3Ø 1.10 in |
85 KG/MM² 1Ø 40 mm 2Ø 32 mm 3Ø 24 mm |
85 KG/MM² 1Ø 1.57 in 2Ø 1.26 in 3Ø 0.94 in |
CM105x95x89 | KG582 | TECNHICAL DATA SHEET |
| MODELP56 | CUTS PER MINUTE5 | HP/KW7,5/5,5 | 65 KG/MM² 1Ø 46 mm 2Ø 36 mm 3Ø 30 mm |
65 KG/MM² 1Ø 1.81 in 2Ø 1.42 in 3Ø 1.18 in |
85 KG/MM² 1Ø 42 mm 2Ø 34 mm 3Ø 26 mm |
85 KG/MM² 1Ø 1.65 in 2Ø 1.34 in 3Ø 1.02 in |
CM130x95x89 | KG676 | TECNHICAL DATA SHEET |
| MODELP74 | CUTS PER MINUTE5 | HP/KW7,5/5,5 | 65 KG/MM² 1Ø 60 mm 2Ø 42 mm 3Ø 34 mm |
65 KG/MM² 1Ø 2.36 in 2Ø 1.65 in 3Ø 1.34 in |
85 KG/MM² 1Ø 50 mm 2Ø 36 mm 3Ø 30 mm |
85 KG/MM² 1Ø 1.97 in 2Ø 1.42 in 3Ø 1.18 in |
CM160x116x96 | KG1650 | TECNHICAL DATA SHEET |
Category:
ProdottiDate:
8 May 2024